Fh21L-60 80A Switching Capability New Energy

• Theory: Latching Relay
• Usage: New Energy
• Electricity Type: Dc
• Load: High Power Relay
• Action Principle: Electromagnetic Type
• Size: Miniature
• Model NO.: FH21L-60
• Type: Electric Parameter Relay
• Breakdown Voltage: 4kv
• Unit Weight: 36g
• Construction: Flux Proofed
• Termination: PCB Type+Screw Type(Xb)
• Transport Package: Export Carton
• Specification: 38*30*16.5(mm)
• Trademark: FANHAR
• Origin: China
• HS Code: 85364

Product Description

1.80A switching capability

2.Single coil and double coils are available

3.External accessories such as manganese copper shunts and

transformers can be ordered according to customer requirements
4.Breakdown voltage (between contact and coil):4KV
5.Meet standard of IEC62055-31:2005 UC2
6.Environment-friendly product(RoHS compliant)
8.Outline Dimensions:(38.0×30.0×16.5)mm

9.Outline Dimensions:(38.0×30.0×16.5)mm

10.Power frequency interference resistance, and good consistency

11.Main application: smart meter, compound switch,new energy

Remark:

1.In case of no tolerance shown in outline dimension:outline dimension≤1mm,tolerance should be±0.2mm;outline dimension >1mm and <5mm,tolerance should be ±0.3mm;outline dimension≥5mm,tolerance should be ±0.5mm.

2. The tolerance without indicating for PCB layout is always ±0.1mm.
 

NOTICE:

1 For the state of latching relay as delivered,If the customer has no special requirements, we default to the closed state before delivery,but due to transportation or relay installation by shock and other factors may change the state,so please reset it to the closed or open state as needed when using;

2 In order to maintain the initial performance parameters of the relay, please be careful not to drop the product or be affected by external force;

3 In order to maintain "opening" or "closing" status,energized voltage applied across the coil should reach the rated voltage,it is recommended that the actual driving voltage be 1~1.5 times the rated voltage, Pulse width ≥50ms,and do not energize to "opening" coil and "closing" coil simultaneously,long energized time(more than 1 min) should also be avoided;

4 Normally the load terminals are not suitable for reflow solder, wave solder or tin solder, we suggest use spot welding. Load terminals shall be prevented from assembly stress;

5 Latching relays are customized products,the above cases are only for reference. If you have any questions, please contact Fanhar for more technical support;

6 The specification is for reference only.Specifications subject to change without notice.